Metal Buildings

We take great pride in quality work.  One thing you should know is NOT ALL SPRAY FOAM APPLICATORS ARE QUALIFIED TO SPRAY FOAM.  It is a skill that is learned through years of experience to provide a quality finished product.  This is especially important when insulating metal buildings.  Why?  On many buildings, the foam will remain exposed, so therefore it needs to look aesthetically pleasing.  Also, it may be painted, and it is hard to paint if it is not smooth.  We strive to make our foam uniform and smooth to provide the best product possible!

When we give an estimate for a specified depth of foam, it is the minimum you'll receive.  For example, if we bid 2" of foam the foam will be at least 2" everywhere.  Some contractors will give an average of 2", so some spots will be 1.5", some will be 2", some will be 2.5".  Check out the videos below to see how it's done!

  • Wall Spray - 2" closed-cell foam on metal building.
    This video is of our applicator spraying 2" of closed-cell foam on the walls of the Dakota County Maintenance Building.
  • This video is of our applicator spraying 2" of closed-cell foam on the ceiling of the Dakota County Maintenance Building.
  • This video is of the finished product after 2" of closed-cell foam has been sprayed on the Dakota County Maintenance Building.

Contact Us

Click here for a FREE ESTIMATE!

Questions?

Don't hesitate to contact us with your questions or comments. Please see our Contact Us page for complete contact information.

Share by: